Your cameras already saw everything.
Now they can tell you.
Gauss reads occupancy, queue depth, staffing coverage, and traffic flow straight out of the CCTV you already have — second by second, with no new hardware and no manual review.
- SetupExisting RTSP / NVR
- CoveragePer-zone, per-camera
- RefreshSecond-by-second
- New hardwareNone required
See it on your own footage.
Tell us about your site — we'll walk one clip through Gauss and send back the same breakdown shown below.
What Gauss read off one 99-second clip.
Six numbers, pulled automatically from a single unedited, fixed-camera clip — no tagging, no manual counting. This is the same kind of breakdown the form above sends back for your footage.
- 12.6Avg. people in viewrange 8–15
- 15Peak occupancyreached 5×
- 2.6Avg. queue lengthpeak 4 waiting
- 100%Clip with a customer servedcounter never idle
- 28%Clip with a 2nd staffer at tillbackup opens 0:20
- 8/12Est. entries / exitsnet −4 over clip
Occupancy over time — total people in view
Departure wave · 1:19–1:29The clip opens already busy — 12 to 15 people in frame within the first ten seconds — and holds between 13 and 15 for almost a full minute. The one sharp break comes late: between 1:19 and 1:29, a family group finishes checking out and leaves together, and occupancy falls from 14 to 8 — the fastest, largest change anywhere in the clip.
Four zones, tracked independently.
Gauss doesn't just count heads — it knows whether someone is at the till, waiting, browsing, or working.
- At counter 1.5
- In queue 2.6
- Browsing aisles 6.6
- Staff 1.3
Bars scaled to a shared 0–12 range so zones are directly comparable. Tick mark = peak; fill = clip average.
The counter is never idle — a customer is being served across 100% of the clip, and there's a live queue for the entire 99 seconds.
At any given moment, more than half of everyone in the store is browsing rather than transacting — checkout is busy, but it isn't the bottleneck holding people in the building.
01 · Zone intelligence
Not just a headcount. A floor plan that updates itself.
Every zone on your floor gets classified automatically — no manual tagging, no calibration walk, no template per store layout.
- Per-zone classification out of the box
- Counter, queue, aisles, and staff — tracked separately
- No manual zone-tagging or calibration walk
- Works across every camera on site, independently
02 · Second-by-second timeline
Every moment that explains the day, flagged automatically.
Backup staffing, peak queues, and departure waves get called out the moment they happen — timestamped, ranked, and ready to export.
- Staffing-gap and backup events flagged live
- Peak-queue and peak-occupancy markers
- Arrival and departure waves called out automatically
- Exportable, timestamped event log
03 · One dashboard, every location
Roll every store, yard, or floor into one view.
Because Gauss runs on the cameras you already have, adding a second site is a config change, not a truck roll. Compare locations side by side and route the daily digest to whoever owns the P&L.
- Cross-location comparison view
- Daily or weekly digest email
- CSV and API export
- Custom alert thresholds per site
How Gauss stacks up against counting it by hand.
| Capability | Gauss | Manual headcount | Standalone people-counter |
|---|---|---|---|
| Setup | Uses cameras you already have | Person with a clicker | New sensor per doorway |
| Zone awareness | Counter, queue, aisles, staff | Total only | Usually none |
| New hardware | None required | N/A — ongoing labor | Required, per doorway |
| Queue & staffing insight | Included | No | No |
| Historical trend export | Full second-by-second | No | Limited |
| Alerting | Configurable thresholds | No | Rarely |
| Cost model | Per camera or per site | Hourly labor, indefinitely | Hardware + per-device fee |
From existing footage to a coaching-ready report.
- 01
Connect
Point Gauss at the RTSP stream, NVR export, or cloud VMS you already run. No new cameras, no site visit.
- 02
Analyze
Gauss reads occupancy, zones, and flow frame by frame, and timestamps every event as it happens.
- 03
Report
A live dashboard, daily digest, and exportable stats land automatically — no analyst required.
- 04
Act
Staffing gaps, queue spikes, and traffic waves trigger alerts your ops team can act on the same day.
The fine print, up front.
Ingest
- RTSP / ONVIF live stream
- NVR or DVR clip export
- Cloud VMS pull
- Multi-camera per site
Processing
- Zone-aware people counting
- Queue & dwell detection
- Staff vs. customer classification
- Entry / exit estimation
Output & access
- Live web dashboard
- CSV + API export
- Daily / weekly digest email
- Custom alert thresholds
Got questions about video intelligence?
Don't see yours? Talk to an expert →
Do I need to install new cameras?
No. Gauss reads the footage your existing CCTV, NVR, or cloud VMS already records — point it at a stream or a clip export and it starts analyzing.
How is this different from a doorway people-counter?
A doorway sensor gives you one number — a total. Gauss classifies zones (counter, queue, aisles, staff) from the same footage, so you get occupancy, queue depth, and staffing coverage, not just a headcount.
What footage formats work?
Standard IP camera streams over RTSP/ONVIF, NVR or DVR clip exports, and most cloud VMS platforms. Not sure what you have? Tell us in the form above and we'll check.
Is pricing per camera or per site?
It's scoped to camera and site count. Share your setup above and we'll come back with a straight number — no slide deck, no pressure.
Does it need constant internet at the location?
Gauss is built around periodic upload rather than a constant live link. Tell us about the site's connectivity and we'll confirm what's needed.
How accurate is the counting?
The sample breakdown above is real output from one unedited, 99-second clip — that's the level of detail delivered per camera, per zone.
Can it feed our existing dashboard or BI tool?
Yes — CSV export and an API are both available.
Does Gauss store the video, or just the data?
Gauss's job is turning video into structured stats. Clip retention is configurable — ask your rep about a policy that fits your setup.
Every camera you already own is a data source. It just hasn't been asked the right questions yet.
Gauss reads occupancy, queue depth, staffing coverage, and traffic flow straight out of standard CCTV — second by second, floor by floor, with no new hardware to install.